Industrial Flake Cement Flooring
Industrial Flake System
Heavy-duty 3 Layer Urethane Cement Flooring System engineered for thermal shock, moisture mitigation, chemical resistance, forklift traffic, and long-term industrial durability.
Performance Metrics
-20° to 230°F
Thermal Shock Resistance
99% RH
Moisture Protection
Forklift Rated
Heavy Traffic Durable
UV Stable
Polyaspartic Protection
Industrial Abuse Never Looked This Good
LIBERTY INDUSTRIAL FLAKE SYSTEM is a heavy duty industrial grade flooring system featuring our high quality Thin Mil Urethane Cement to form a seamless durable surface to keep in compliance with all cGMP requirements.
The multi layer system with a sand broadcast is designed to handle harsh, abusive environments. The system is finished off with our Premium Polyaspartic clear Top Coat to provide superior protection against industrial wear and chemical exposure.
Engineered for Harsh Industrial Conditions
Moisture Protection
Handles up to 99% RH and 25 lbs moisture vapor emission without compromise.
Thermal Shock Resistant
Withstands rapid temperature cycling from -20°F to 230°F.
Chemical & Wear Resistant
Superior resistance against industrial chemicals, abrasion, and impact.
Slip Resistant Safety
Broadcast textures maintain traction and improve workplace safety.
Industrial Flake System
1st Layer / Base Coat
Liberty 1620 Thin Mil Urethane Cement creates a seamless, heavy-duty foundation with superior bonding, thermal shock resistance, and moisture tolerance.
Coverage:
200 SQ FT / Kit
Sand Broadcast
A #30 Mesh Silica Sand broadcast to refusal reinforces the system with added strength, impact resistance, and long-term durability.
Full Broadcast System
2nd Layer / Grout Coat
Liberty 1620 Thin Mil Urethane Cement encapsulates the broadcast aggregate, increasing compressive strength, chemical resistance, and surface durability.
Coverage:
200 SQ FT / Kit
Decorative Vinyl Flake Broadcast
A decorative vinyl flake broadcast to 100% refusal provides a durable, slip-resistant finish while enhancing the floor’s appearance.
Full Broadcast System
3rd Layer / Top Coat
Liberty 1776 Premium Polyaspartic (Clear) seals the system with superior protection against industrial wear, chemical exposure, UV rays, and daily traffic.
Coverage:
200 SQ FT / 2 Gal Kit
Built for Demanding Facilities
Forklift & Heavy-traffic Areas
Manufacturing
Laboratories
Cannabis Grows
Pharmaceuticals
Clean Rooms
Restrooms
Locker Rooms
Warehouses
Schools
Supermarkets
Cafeterias
Dining Areas
Kitchens
Show Rooms
Performance You Can Specify With Confidence
Designed to exceed expectations in the harshest commercial and industrial environments.
Thermal Resistance
-20°F to 230°F thermal cycling protection.
Moisture Vapor Protection
Handles up to 99% RH and 25 lbs MVT.
Compliance
FDA, USDA, EPA, ADA, and OSHA compliant.
Fast Cure Technology
Ultra fast cure available for rapid return to service.
Estimate Material Requirements
Quickly estimate how many kits are needed for your industrial flooring project.
Frequently Asked Questions
How is the Industrial Flake System different from the Standard Flake System?
It adds a sand-broadcast TMUC reinforcement layer beneath the vinyl flake, giving it the same heavy-duty, forklift-rated strength as Liberty’s other industrial systems — while keeping the decorative flake finish.
Can this floor handle forklift and heavy equipment traffic?
Yes, it’s rated for forklift and heavy-traffic areas, manufacturing, and warehouses, combining industrial-grade strength with a decorative flake finish.
Will the decorative flake wear off under heavy use?
No — the flake is broadcast to 100% refusal and sealed beneath a Premium Polyaspartic topcoat, locking it into the system rather than leaving it exposed as a surface-only finish.
Does this system resist moisture vapor and thermal shock like Liberty's other industrial floors?
Yes — it carries the same third-party lab-approved rating for up to 99% RH and 25 lbs moisture vapor, plus thermal shock resistance from -20°F to 230°F.
Is this a good option for a cannabis grow or pharmaceutical facility that also wants a decorative finish?
Yes — it’s designed to meet cGMP compliance requirements while giving the space a more finished, professional look than a plain industrial coating.
How slip-resistant is this floor in wet or washdown areas?
The topcoat includes slip-resistant texture to maintain traction even when floors are wet, which matters in wash-down manufacturing and food-adjacent environments.
Does it meet regulatory compliance standards?
Yes, it meets FDA, USDA, EPA, ADA, and OSHA requirements.
How much material does a typical installation require?
Coverage runs about 200 sq ft per kit for each TMUC layer and roughly 200 sq ft per 2-gallon kit for the topcoat, depending on flake density. [CRO hook: “Get a materials estimate for your facility in under 24 hours.”]